Johnson Controls LN-DSWSC1-0 Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 8

Johnson Controls LN-DSWSC1-0 Скачать руководство пользователя страница 8

Published in U.S.A.

www.johnsoncontrols.com

LN-Display Installation Instructions

8

Metasys® and Johnson Controls® are registered trademarks of Johnson Controls, Inc.

All other marks herein are the marks of their respective owners. © 2014 Johnson Controls, Inc.

Building Efficiency

507 E. Michigan Street, Milwaukee, WI 53202

Technical Specifications

LN-Display

Power

Voltage:

24 VAC/DC; ±15%, 50/60 Hz, Class 2

Protection:

500 mA auto-reset fuse

Consumption:

8 VA

Environmental

Operating Temperature:

32 to 158°F (0 to 70°C)

Storage Temperature:

-4 to 158°F (-20 to 70°C)

Relative Humidity:

0 to 90% noncondensing

General

Processor:

Neuron 3150™, 8 bits, 10 MHz

Memory:

Nonvolatile Flash 64 K (APB application,

Nonvolatile Flash 64 K [storage])

Communication:

LonTalk® protocol

Transceiver:

TP/FT-10, 78 Kbps

Status Indicator:

Green LEDs on outputs

Communication Jack Input:

1/8 in. (3.5 mm)

Enclosure

Material:

ABS Resin

Color:

Off White

Dimension (FMT):

6 in. x 6 in. x 1.48 in. (151 x 151 x 38 mm)

Dimension (SMT):

4.57 in. x 4.57 in. x 1.48 in. (116 x 116 x 38 mm)

Shipping Weight (FMT):

0.88 lb (0.40 kg)

Liquid Crystal Display (LCD)

Type:

Backlit

Definition:

128 x 128 pixels

Display Area:

2.1 x 2.1 in. (53 x 53 mm)

Screen Saver:

Customizable

Compliance

United States

UL Listed, File E107041, CCN PAZX, to UL 916, Energy Management
Equipment. FCC Compliant to CFR 47, Part 15, Subpart B, Class B.

Canada

UL Listed, File E107041, CCN PAZX7, to CAN/CSA C22.2 No. 205, Signal
Equipment. Industry Canada, IECES-003.

The performance specifications are nominal and conform to acceptable industry standards. For application at conditions beyond these
specifications, contact the local Johnson Controls office. Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or
misuse of its products

.

«
...
6
7
8

Содержание LN-DSWSC1-0









Отзывы:

Нет отзывов