LN-Display Installation Instructions
1
Applications
The LN-Display controller has multifunction LCD
display. The controller can operate with LN Series
controllers or other multi-vendor open and
interoperable L
ON
W
ORKS
® controllers, and can display
up to 250 network variables.
The controller is based on L
ON
W
ORKS
technology for
peer-to-peer communication between controllers. The
Display is available in two casings: surface and flush
mount.
North American Emissions Compliance
United States
Canada
Installation
Dimensions
Figure 1 shows the LN-Display surface mount casing
dimensions.
Figure 2 shows the flush mount casing dimensions.
This equipment has been tested and found to
comply with the limits for a Class A digital device
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference when this equipment is
operated in a commercial environment. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is
likely to cause harmful interference, in which case
the user will be required to correct the interference
at his/her own expense.
This Class (A) digital apparatus meets all
requirements of the Canadian Interference-Causing
Equipment Regulations.
Cet appareil numérique de la Classe (A) respecte
toutes les exigences du Règlement sur le matériel
brouilleur du Canada.
Figure 1: Surface Mount Casing
Dimensions, in. (mm)
F
IG: s
u
rfa
ce_
m
o
u
n
t
1.4754 in.
(37.47 mm)
4.5687 in.
(116 mm)
4.5685
(116 mm)
3.3959 in.
(86.25 mm)
3.4100 in.
(86.61 mm)
2.3620 in.
(59.22 mm)
3.2500 in.
(82.55 mm)
BACK VIEW
BOTTOM VIEW
FRONT VIEW
SIDE VIEW
LN-Display
Installation Instructions
LN-DSWSC1-0, LN-DSWSC2-0
Code No. LIT-1201904
Issued April 24, 2014
Supersedes June 21, 2012