Johnson Controls Frick Vyper 305/254 Horsepower Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 72

Johnson Controls Frick Vyper 305/254 Horsepower Скачать руководство пользователя страница 4

VYPER

™

VARIABLE SPEED DRIVE

INSTALLATION - OPERATION - MAINTENANCE

100.200-IOM (SEP 13)

Page 4

PREFACE

This manual has been prepared to acquaint the owner and

service person with the INSTALLATION, OPERATION, and

MAINTENANCE procedures as recommended by Johnson

Controls-Frick for the Frick Vyper

™

Variable Speed Drive unit.

For information about the functions of the Quantum

™

LX

Control panel, communications, specifications, and wiring

diagrams, please see the applicable and most current Frick
documentation.

It is most important that these units be properly applied to an

adequately controlled refrigeration system. Your author ized

Frick repre sentative should be consulted for expert guidance

in this determination.

Proper performance and continued satisfaction with these

units is dependent upon:

CORRECT INSTALLATION

PROPER OPERATION

REGULAR, SYSTEMATIC MAIN TENANCE

To ensure correct installation and application, the equipment

must be properly selected and connected to a properly de-

signed and installed system. The Engineering plans, piping

layouts, etc. must be detailed in accordance with the best

practices and local codes, such as those outlined in ASHRAE

literature.

The Frick Vyper

™

is a sophisticated piece of electronic con-

trol equipment. All safety precautions consistent with opera-
tion of high current and voltage electrical equipment should
be strictly enforced.

JOB INSPECTION

Immediately upon arrival examine all crates, boxes, and

exposed compressor and component surfaces for damage.

Unpack all items and check against shipping lists for any

possible shortage. Examine all items for damage in transit.

TRANSIT DAMAGE CLAIMS

All claims must be made by consignee. This is an ICC re-

quirement. Request immediate inspec tion by the agent of

the carrier and be sure the proper claim forms are executed.

Contact Johnson Controls-Frick, Sales Administration

Depart ment, in Waynesboro, PA to report dam age or short-

age claims.

NOTICE

Damage must be photographically documented.

UNIT IDENTIFICATION

Each Vyper

™

has a unit identification label located on the

right side of the cabinet. The data plate contains the John-
son Controls-Frick Part Number, the unique Serial Number,
and the basic Model Number for the unit. In addition, the
data label also has electrical information pertinent to the
individual unit.

NOTICE

When inquiring about the Vyper

™

or ordering spare

parts, please provide the MODEL Number and SERIAL
Number from the data plate.

Figure 1 - Vyper

™

Data Plate

DANGER

Always wait 5 minutes after Vyper

™

power is off to

open the cabinet. This time allows the capacitors to
discharge. Failure to do so could result in serious injury
or death.

«
...
2
3
4
5
6
...
»

Содержание Frick Vyper 305/254 Horsepower









































































Отзывы:

Нет отзывов