Johnson Controls Frick AcuAir Скачать руководство пользователя | Manualshive

Страница: 5 / 56

background image

210.100-IOM (JUL 2021)

Page 5

AcuAir Hygienic Air Units

Installation - Operation - Maintenance

General information

This manual, in combination with the appropriate controls
related manuals, provides the information necessary to
safely install and start up Frick

®

AcuAir

®

equipment. Due

to the custom nature of the AcuAir

®

products there may

be areas beyond the scope of this manual. If there are any
questions about a special application lacking the required
information, contact the installing contractor or your local

Frick Sales Office.

Safety

The customer is responsible for providing qualified and

trained personnel to install and operate the equipment.
Consult all local building, occupational safety, electrical,
gas, and other codes applicable to the installation.

A variety of optional safety features are available from the
manufacturer; it is the responsibility of the owner to deter-
mine if the unit is equipped with all of the safety devices
required for the particular application.

Safety considerations include:

• The accessibility of the equipment to non-service

personnel.

•  The provision of electrical lockout switches.
•  Maintenance procedures.
•  Automatic control sequences.

CAUTION

Users and installers of this equipment must be aware
of all relevant safety procedures and information
such as AMCA publication 410-90-Safety Practices.

CAUTION

Never open an access door while air unit is in opera-
tion.

Warranty

NOTICE

For Warranty Support with the Frick AcuAir unit,
contact Frick Service at 717-762-2121.

CAUTION

A fan, even though locked out electrically, can rotate

in a seemingly insignificant air flow. During mainte

-

nance, secure the impeller to restrict rotation. Verify
that the restrictive device is removed before putting
the fan back into service.

CAUTION

Equipment wired to automatic control devices may
start without warning, resulting in personal injury or
property damage. In many instances, a unit has mul-
tiple electrical connection points. To prevent unfore-
seen startup, before beginning work on a hygienic
air unit, always lock out all power supplies.

CAUTION

Always replace any protective covers removed for
servicing.

CAUTION

Always replace bolts or locks on latches of access
doors that provide access to areas with moving
parts. This mechanical protection from moving parts
is required by UL 1995 (See

).

CAUTION

A number of additional safety issues are discussed
throughout the manual. Read the complete manual
before installing, operating, or servicing the equip-
ment.

«
...
3
4
5
6
7
...
»

Содержание Frick AcuAir

























































Отзывы:

Нет отзывов

Похожие инструкции для Frick AcuAir

Бренд: Makita Страницы: 7

Бренд: Xstream Страницы: 40

Бренд: Daewoo Страницы: 14

Craftsman 919.150270

Бренд: Craftsman Страницы: 11

Craftsman 919.153011

Бренд: Craftsman Страницы: 16

PERMANENTLY LUBRICATED TANK MOUNTED AIR COMPRESSOR 919.167321

Бренд: Craftsman Страницы: 44

evolv 921.167500

Бренд: Craftsman Страницы: 28

Бренд: Craftsman Страницы: 35

Бренд: Craftsman Страницы: 50

Бренд: Craftsman Страницы: 52

Бренд: Sealey Страницы: 2

Бренд: Sealey Страницы: 3

Бренд: Sealey Страницы: 4

Бренд: Sealey Страницы: 3

Бренд: Sealey Страницы: 4

Бренд: Sealey Страницы: 4

Бренд: Sealey Страницы: 4

Бренд: Sealey Страницы: 5

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды