FCP-NA-701, FCP-PA-701
24-11482-00006 Rev. —
8
Menu item
Description
Setting options
Default
28
Pipe state – calendar
ON
OFF
OFF
29
Heat to cool day
(unavailable if pipe state – calendar = OFF)
1-Mar to 31-May
15-Apr
30
Cool to heat day
(unavailable if pipe state – calendar = OFF)
1-Sep to 30-Nov
15-Oct
31
Pipe state
(unavailable if system type ≠ 2FCU or if pipe
sensor = true or if pipe state – calendar = ON)
0: heat
1: cool
0
32
Heat to cool threshold
(unavailable if system type ≠ 2FCU or if pipe
sensor = false)
50°F - 72°F (10°C - 22°C)
60°F (16°C)
33
Cool to heat threshold
(unavailable if system type ≠ 2FC or if pipe sensor
= false)
55°F - 90°F (13°C - 32°C)
80°F (27°C)
34
Purge frequency
(unavailable if system type ≠ 2FC or if pipe sensor
= false)
0: Never
1: 2 hours
2: 24 hours
With pipe sensor: 1
Without pipe sensor: 0
Programmable mode (FCP-PA-701 only)
The programmable mode is available only on the FCP-PA-701 model. In the programmable mode menu you can adjust time of day,
date, schedule for heat, and schedule for cool.
To enable the programmable mode, complete the following steps:
1. Press
Mode
to set the thermostat to OFF mode.
2. Press and hold
Mode
and
Fan
for 5 seconds to access the advanced settings menu.
3. Press
Up
to navigate to User Preference Settings, then press
Mode
to enter the menu.
4. Press
Mode
to navigate to 10.
5. Use the
Up
and
Down
buttons to set the programmable mode to ON and press
Mode
to confirm the change.
To access the programmable mode, press
Mode
to set the thermostat to OFF mode, then press and hold
Mode
and
Up
for 5 seconds.
Setting the time and date
To set the time and date, complete the following steps:
1. In the progrmmable mode, press
Mode
to access the Set Time menu.
2. In the Set Time menu, press
Mode
to scroll through the menu and press
Up
or
Down
to change the options.
3. After each change, press
Mode
to confirm the change.
4. After you set all the options in the Set Clock menu, press
Mode
to continue to set the schedule, or press
Fan
to exit the menu and
retun to the home screen.
Setting the heat and cool schedule
You can program a schedule for up to seven consecutive days. Each day can consist of a maximum of six periods. You can change the
start times for each period by increments of 15 minutes.
To set the heat and cool schedule, complete the following steps:
1. In the programmable mode, press
Up
or
Down
to navigate to the heat icon, then press
Mode
to access the menu.
2. Press
Up
or
Down
to select the day of the week you want to schedule, then press
Mode
to confirm the selection.
3. Press
Mode
to navigate to the following setting and press
Up
or
Down
to set the required period and temperature. Repeat this step
until you set all the schedule settings.
4. Press
Mode
to save the settings and return to Set Sche menu.
5. Press
Up
or
Down
to navigate to the cool icon and press
Mode
to access the menu.
6. Repeat Step 3 and Step 4 until you set all the schedule settings.
Remote sensor
The system configuration summary indicates if a remote sensor is installed. Access the advanced settings menu to see your system
configuration summary.
You can adjust the values of the temperature offset to calibrate the remote sensor temperature.
Table 6: System configuration settings (part 2 of 2)
