DRCPX Remote Controller User Manual
3
Introduction
This is a general use remote controller. It can be used with air conditioners that are not
operating. For some functions that the model doesn't have, if you press the corresponding
button on the remote controller, the unit will keep its original running status.
After turning on the power, the air conditioner will give out a sound. The operation indictor
turns ON (red indicator). After that, you can operate the air conditioner by using this remote
controller.
•
Press the ON button, and the signal icon
on the display of remote controller
blinks once, and the air conditioner makes a “de” sound. This sound means the signal
was sent to the air conditioner.
•
Under OFF status, the set temperature and clock icons are displayed on the display of
remote controller (If timer on, timer off and light functions are set, the corresponding
icons are displayed on the remote controller at the same time).
Under ON status, the corresponding function icons are displayed on the screen:
1
ON/OFF button
Press this button to turn the air conditioner ON or OFF. After turning on the air conditioner, the
operation indicator on indoor unit's display turns ON (green indicator. The color is different
among models), and the indoor unit will make a sound.
MODE button
Press the MODE button to select the operation mode you want.
AUTO COOL
DRY FAN HEAT
•
When selecting Auto mode, the air conditioner operates according to the default factory
setting. The set temperature can't be adjusted or displayed. Press the FAN button to
adjust the fan speed. Press SWING button to adjust the louver angle of the fan.
•
Select Cool mode and the air conditioner operates under this mode. The cool
indicator on the indoor unit turns ON.
o
Press the UP or DOWN button to adjust set temperature.
o
Press the FAN button to adjust the fan speed.
o
Press the SWING button to adjust the louver angle of the fan.
•
When selecting Dry mode, the air conditioner operates at low speed. The Dry indicator
on the indoor unit turns ON. Under dry mode, the fan speed can't be adjusted. Press
the SWING button to adjust louver angle of the fan.
