Johnson Controls CK722, Руководство пользователя

Страница: 17 / 32

24-10239-30 Rev. D 2-1
Chapter
2
This document contains confidential and proprietary information of Johnson Controls, Inc.
© 2016 Johnson Controls, Inc.
I N S T A L L A T I O N
This chapter describes how to use the Network Utility Tool to install the CK722 controller’s
operating system and firmware.
I
NSTALLATION
O
VERVIEW
The installation process consists of the following steps:

Preparing the Computer (see page 2-1)

Configuring Tera Term Pro (Optional) (see page 2-5)

Installing the CK722 OS and Firmware (see page 2-6)

Downloading the P2000SCT archive database to each CK722 controller that has
been updated with the Network Utility Tool (see page
2-12)
Before continuing, verify you have met the requirements in the “System Requirements”
section, starting on page 1-2.
P
REPARING THE
C
OMPUTER
This section provides instructions on preparing your computer to install the CK722 disk
image files.
Connecting the Computer to the CK722
This section provides instructions on connecting a computer to the CK722 to run the
Network Utility Tool.

To connect the computer to the CK722 controller:
1. Disconnect the CK722 from the Ethernet network, and connect a switch/hub
with two straight-through Ethernet cables between the Ethernet port of the
CK722 and your computer. See Figure 2-1.