Installation
CK722 Network Utility Tool
2-12
24-10239-30 Rev. D
This document contains confidential and proprietary information of Johnson Controls, Inc.
© 2016 Johnson Controls, Inc.
6. Disconnect the Ethernet straight-through cable from the CK722 and
reconnect the CK722 to the Ethernet network shared with the P2000 server.
If you have other CK722 controllers to update, connect the computer and
hub/switch to a new CK722 and repeat Step 1 through Step 6 of this section.
7. Close the Network Utility Tool session.
The disk image installation is complete.
D
OWNLOADING THE
CK722 D
ATABASE
(P2000 SCT)
After the disk image installation is complete, download the controller’s database from the
P2000 SCT to the CK722. Refer to the
P2000AE System Configuration Tool (SCT) Manual
for details on downloading the database from the P2000 SCT. Refer also to the
CK722
Commissioning Guide
for information on downloading the P2000 SCT archive database to a
new CK722 controller.
N
OTE
When downloading the controller configuration after its firmware was
upgraded via the NUT, you must select
Use this option to change a
device address via download
on the Device Change screen and enter
the existing IP address of the controller. Refer to the P2000AE System
Configuration Tool (SCT) Manual for details.
Содержание CK722
Страница 1: ...Network Utility Tool NUT CK722 Network Controller March 2016 24 10239 30 Revision D ...
Страница 2: ......
Страница 6: ......