Johnson Controls CK722, Руководство пользователя, Страница: 21 / 32

CK722 Network Utility Tool Installation
24-10239-30 Rev. D 2-5
This document contains confidential and proprietary information of Johnson Controls, Inc.
© 2016 Johnson Controls, Inc.
C
ONFIGURING
T
ERA
T
ERM
P
RO
(O
PTIONAL
)
This section provides instructions on configuring Tera Term Pro. If your configuration
settings currently match the settings outlined in this section, or if you will not be using
terminal emulation software, skip to the next section. The required settings to turn your
computer into a CK722 terminal are:

Connect to serial port: COM1 or COM2 (depending on the COM port you are
using)

Serial port baud rate: 115200
N
OTE
Once Tera Term Pro is configured according to the following instructions,
the settings will take effect each time you launch the application.

To configure Tera Term Pro:
1. Open Windows Explorer®.
2. Access the following directory:
C:\Program Files\TTERMPRO
3. Delete the TERATERM.INI file.
4. Launch Tera Term Pro.
5. On the Tera Term: New connection dialog box, select the
Serial radio
button and the COM1 or COM2 port, depending on the COM port you are
using. Click OK .
6. From the menu bar, select Setup>Serial Port .