1. Before Installation and Operation
Set the batteries (AAA/1.5V × 2) for the controller as
follows.
1. Remove the battery cover by sliding it toward
the arrow direction part of the cover as shown
at right.
2. Set the batteries. (Insert the batteries according to
the marks of + and - on the case.)
2. Setting Batteries
This packing contains the following parts. Check the contents and the number of the parts.
Name
Qty.
Remark
Wireless Controller
1
For Operation Control
Holding Bracket
1
For Controller
Battery (AAA/ 1.5V Dry Cell)
2
For Power Source of Controller
Screw
2
For Fixing “Holding Bracket” onto Wall
Brand Label
1
HITACHI, YORK
Slide the battery
cover toward the
arrow direction
with pushing.
AAA Batteries
Battery Cover
ATTENTION:
Do not press the “ On” and “On Timer”
switches until the preparation for the Test Run
is completed.
Brand Label
NOTE: Either the York or the Hitachi logo label, but
not both, will be shipped with the unit.
This Area
5
P5415475
●
Do not turn ON the power source, unless the preparations for the test run are completed.
●
Read this manual together with the installation and maintenance manual of the indoor unit.
