Table 8: Advanced Terminal Unit Controller
Compliance
Europe:
Johnson Controls declares that this product is also in compliance with
the essential requirements and other relevant provisions of the EMC Directive
and Low Voltage Directive (IEC/EN60730-1)
Declared as an Electronic Independently-Mounted Control for mounting in or on
a panel
BACnet International:
BACnet Testing Laboratories (BTL) Protocol Revision 15 Listed BACnet Application
Specific Controller (B-ASC)
Additional Product Declarations
Information
Description
Purpose of Control
Operating Control
Construction of control and whether the control is
electronic
All Models:
Electronic Independently Mounted Control - Intended to be mounted in a remote
panel
No. of cycles
See: Input and Output Capabilities
TYPE 1 or TYPE 2 action
TYPE 1.C (Micro-interruption) for relays
External Pollution Situation
All Models: Pollution Degree 2
RATED IMPULSE VOLTAGE
4000 V
Ball Pressure temperature
90°C
BINARY - RELAY (Outputs)
Reference all relay commons to the same pole of the supply circuit
BINARY - Triacs (Outputs)
Reference all triac commons to the same pole of the supply circuit
Points of Single Contact
APAC
Europe
NA/SA
JOHNSON CONTROLS
C/O CONTROLS PRODUCT MANAGEMENT
NO. 32 CHANGJIJANG RD NEW DISTRICT
WUXI JIANGSU PROVINCE 214028
CHINA
JOHNSON CONTROLS
WESTENDHOF 3
45143 ESSEN
GERMANY
JOHNSON CONTROLS
507 E MICHIGAN ST
MILWAUKEE WI 53202
USA
Software terms
Use of the software that is in (or constitutes)
this product, or access to the cloud, or hosted
services applicable to this product, if any,
is subject to applicable terms set forth at
www.johnsoncontrols.com/techterms. Your use of
this product constitutes an agreement to such terms.
Product warranty
This product is covered by a limited warranty, details
of which can be found at www.johnsoncontrols.com/
© 2019 Johnson Controls. All rights reserved. All specifications and other information shown were current as of document revision and
are subject to change without notice.
