ANSUL Cartridge Dry Chemical Fire Extinguishers
Models 10, 20, 30, Operation, Inspection, Service and
Maintenance, and Recharge Manual (Form No. F-7674)
2018-OCT-15 REV. 10
FOREWORD
This manual is intended for use with the ANSUL
®
Models 10,
20, and 30 hand portable dry chemical extinguishers.
Those who operate, inspect, maintain, or recharge fire
extinguishers should read this entire manual. Specific
sections will be of particular interest depending upon one’s
responsibilities.
Fire extinguishers are mechanical devices. They require
periodic care. If the extinguishers are not installed properly, are
abused in service or are not properly maintained, they may not
perform reliably.
Inspection, to provide reasonable assurance your fire
extinguisher is fully charged and operable, will vary from hourly
to monthly, based on the needs of the situation. Inspections
should always be conducted at regular intervals. Maintenance,
to help provide maximum assurance the fire extinguisher will
operate effectively and safely, must be conducted annually, or
earlier when indicated by an inspection.
These extinguishers are pressure vessels that must be treated
with respect and handled with care.
Only genuine ANSUL replacement components shall be installed
on ANSUL products. Only Authorized ANSUL Distributors shall
be allowed to service and maintain ANSUL products.
This manual is limited to uses herein described. For other appli-
cations, contact your local Authorized ANSUL Distributor or
Johnson Controls – Technical Services Department, Marinette,
Wisconsin 54143-2542, USA.
Note:
The converted metric values in this manual are provided
for dimensional reference only and do not reflect an actual
measurement.
Form Number: F-7674
Date: 2018-OCT-15
ANSUL, RED LINE, and the product names listed in this material are marks and/
or registered marks. Unauthorized use is strictly prohibited.
Содержание ANSUL 10
Страница 2: ......
