background image

12

 A419 Series Electronic Temperature Controls with Display and NEMA 1 or NEMA 4X Watertight Enclosures

Product/Technical Bulletin

Technical Specifications

Product

A419 Series Electronic Temperature Controls with NEMA 1 General Purpose or NEMA 4X
Watertight, Corrosion-Resistant Enclosures

Setpoint Range

-30 to 212°F (-34 to 100°C)

Differential Range

1 to 30F° (1 to 30C°)

Supply Voltage

24 VAC, 60 Hz, Class 2:

A419GBF-1 (NEMA 1 Enclosure Model)
A419GEF-1 (NEMA 4X Watertight Enclosure Model)

120 or 240 VAC, 60 Hz:

A419ABC-1 (NEMA 1 Enclosure Model)
A419AEC-1 (NEMA 4X Watertight Enclosure Model)

Power Consumption

1.8 VA Maximum

24 VAC Models:

A419GBF-1 (NEMA 1 Enclosure)
A419GEF-1 (NEMA 4X Watertight Enclosure)
100 VA, 30 VAC maximum, Class 2

Output Relay Contacts

Electrical Ratings

120/240 VAC Models:

A419ABC-1 (NEMA 1 Enclosure)
A419AEC-1 (NEMA 4X Watertight Enclosure)

Applied Voltage:

120 VAC

208 VAC

240 VAC

Horsepower N.O. (N.C.) :

1 (0.25) hp

1 (0.33) hp

1 (0.5) hp

Full Load Amperes N.O. (N.C.):

16 (5.8) A

9.2 (4.0) A

8.0 (4.9) A

Locked Rotor Amperes N.O. (N.C.):

96 (34.8) A

55.2 (24) A

48 (29.4) A

Non-inductive Amperes N.O. (N.C.):

15 (10) A

10 (10) A

10 (10) A

Pilot Duty:

125 VA (N.O. contacts) @ 24 to 240 VAC
125 VA (N.C. contacts) @ 120 to 240 VAC
50 VA (N.C. contacts) @ 24 VAC

Sensor Type

A99BB Type PTC Sensor (See Table 6)

Control Ambient

Temperature

Operating:

-26 to 140°F (-32 to 60°C)

Shipping:

-40 to 185°F (-40 to 85°C)

Ambient Humidity

0 to 95% RH Non-condensing; Maximum Dew Point: 85°F (29°C)

Control Material

Case and Cover: 

NEMA 1 High-Impact Thermoplastic
NEMA 4X Watertight, Corrosion-Resistant, High-Impact
Noryl® Thermoplastic

Agency Listings

UL: File E27734; CCN’s XAPX (US), XAPX7 (Canada)
FCC: CFR 47, Part 15, Class A. DOC, Class A

The performance specifications are nominal and conform to acceptable industry standards. For application at conditions beyond these
specifications, contact Application Engineering at 1-800-275-5676. Johnson Controls, Inc. shall not be liable for damages resulting from
misapplication or misuse of its products.

Controls Group

507 E. Michigan Street
P.O. Box 423

Printed in U.S.A.

Milwaukee, WI   53201

www.johnsoncontrols.com

Содержание A419 Series













Отзывы: