Telephone: 01604 762881
15. ERROR CODES
For any other error codes that you may encounter on your boiler, please
refer to your Installation & Maintenance Instructions or contact your
local CORGI registered installer.
16. ANALOGUE TIME CONTROL
(if fitted)
SETTING THE TIME
Rotate the dial clockwise, by hand, until the indicator arrow is pointing to the
current time.
Note: The time is set in 24 hour format.
SETTING THE CENTRAL HEATING ON AND OFF
TIMES
Select the on times by pushing the black tappets to the outside.
Select the off times by pushing the black tappets to the inside
OVERRIDING THE CLOCK
The clock has a manual on off switch which operates as follows
I
Heating on continuously
Heating on timed
0
Heating off
17. DIGITAL PROGRAMMER
(if fitted)
BUTTON DESCRIPTION
Time/Automatic Run mode selection
Prog
Programme selection
Res
Reset clears all settings
ON/OFF selection in Programme mode
Manual override selector in run mode
+/-1h
Summer/Winter time settings
h
Set the hour
m
Set the minute
Day
Set the days
18. LCD DISPLAY
The LCD display incorporates a number of different elements to display
various data and information
Run Mode:
Off
Continuous Off
On
Continuous On
19. PROGRAMMES
The Digital Programmer will accept up to 20 events. Each event consists
of:
An ON or OFF command
Time of day (hour and minutes)
Single day or multiple days
An event is required for each ON and OFF.
NOTE: MULTIPLE ON OR OFF EVENTS MAY BE PROGRAMMED, SEE EXAMPLE.
BEFORE PROCEEDING WITH SETTING THE TIME AND PROGRAMMING THE
UNIT, PRESS THE RESET KEY TO CLEAR ALL DATA FROM THE MEMORY.
ER:??
Indicator Arrow
Black Tappets
Days of the week
1 2 3 4 5 6 7
+1h
AM
8
8
8
8 :
Time of day
Manual Override On
I
