3
Sales/Replacement Telephone 01604 762881
1.
FEATURES
2.
GENERAL DESCRIPTION
2.1
The Q-Vent Compact-L System provides mechanical ventilation to the living/bedroom. The unit is designed
to provide continuous low level extraction from the wet rooms via a system of fixed ductwork and grilles. Heat
is recovered from the stale contaminated air drawn from the wet room and uses a high performance heat
exchanger recovering the heat and transferring it to temper the incoming fresh air into the living/bedroom.
The ventilation rate will increase when the wet room is being used for periods of time, in excess of 2 minutes
and the unit switches to boost mode. The extracted air is then discharged to outside via a single duct and
grille.
2.2
The case is constructed in aluminium/zinc coated steel. Internal faces of the casing are acoustically lined
with flame retardant acoustic foam.
2.3
The unit is fitted with a Real Time Clock (RTC) PCB. This allows the unit to have a Sleep Mode between 22.00
and 05.00. The unit will not be able to go into boost mode during this time. It is fitted with a battery back up
in case there is a loss of mains power. This will keep the current local time up to date on the RTC.
NOTE:
For additional ancillary equipment (e.g. ducting. grilles etc.) contact the Sales Department.
2.
CONTENT
2
2
8
2
2
7
6
4
5
10
11
9
13
1
5
3
13
FIGURE 1.
Q-VENT COMPACT-L main internal features
FEATURES
1
Heat Exchanger
2
100mm/123mm Ø Spigots
3
Extract Fan
4
Supply Fan
5
Fixing Brackets
6
Condense Adapter
7
Condense Drain Pipe
8
Mains Electrical Cover
9
Drain Sensor
10
PCB Assembly
11
Real Time Clock PCB Assembly
