www.johnsonandstarley.co.uk
10
FIGURE 14. Q-VENT CE50 DIMENSIONS
15. SERVICING & MAINTENANCE
IMPORTANT:
Before commencing any servicing or component replacement ensure the electrical supplies to the unit
and ancillary control are ISOLATED.
15.1
The unit will need inspecting on a regular basis. The fan should be cleaned to ensure there is no build-up of
dirt or other deposits.
NOTE:
The fan is a sealed unit and will not need lubrication.
15.2
Disconnect the ducting from the spigots and wipe the inside clean with a damp cloth.
15.3
If replacements part are needed telephone Johnson & Starley Ltd 01604 762881 for further information.
16. USERS INSTRUCTIONS
16.1
Hand the User Instructions to the householder, explain and demonstrate how to use the unit.
16.2
Show how the unit is turned on at the fused spur.
16.3
The unit will now commence extraction at the minimum set speed.
16.4
If the unit is fitted with remote automatic boost switch, demonstrate how the boost works by automatically
boosting the airflow to a predetermined extract rate.
16.5
The period of time the unit will run at boost speed will depend upon the type of automatic boost control fitted.
16.6
Explain the unit will need inspecting and cleaning on an annual basis. See section 15 for cleaning the fan
and spigots.
17. DIMENSIONS
A
C
B
D
E
A
C
B
D
E
