Johnson & Johnson DePuy Synthes TRAUMA Titanium Cannulated Tibial Nail Скачать руководство пользователя страница 16

Страница: 16 / 69

Titanium Cannulated Tibial Nail Expert Nailing System Surgical Technique DePuy Synthes Trauma 15

InSertIng the naIl

Assemble insertion instruments

Instruments

03.010.044

cannulated connecting Screw,
for Standard Insertion handle

03.010.045

Standard Insertion handle

03.010.092

ball hex Screwdriver, 8 mm

orient the insertion handle anteriorly, and match the tang
on the handle to the notch in the nail.

Place the connecting screw into the insertion handle and
thread it into the proximal nail end, using the 8 mm ball
hex screwdriver.

verify the nail is oriented properly on the insertion handle;
secure the assembly with the 8 mm ball hex screwdriver.

Alternative instruments

03.010.017

tibial nail–ex Insertion handle

03.010.145

cannulated connecting Screw, for Short
Insertion handle, with internal thread

or
03.010.046

Percutaneous Insertion handle

03.010.146

cannulated connecting Screw, for
Percutaneous Insertion handle, with
internal thread

Optional instrument

03.010.093

reaming rod Push rod

optionally, slide the connecting screw onto the reaming
rod push rod. Slide the assembly through the insertion handle
and match the tang of the handle to the notch of the nail.
tighten, using the hex on the reaming rod push rod.

Secure the assembly using the 8 mm ball hex screwdriver.

Содержание DePuy Synthes TRAUMA Titanium Cannulated Tibial Nail






































































Результаты поиска

Содержание DePuy Synthes TRAUMA Titanium Cannulated Tibial Nail

Отзывы:

Похожие инструкции для DePuy Synthes TRAUMA Titanium Cannulated Tibial Nail

Бренды по названию

Популярные бренды

Johnson & Johnson DePuy Synthes TRAUMA Titanium Cannulated Tibial Nail, Хирургическая техника

Результаты поиска

Содержание DePuy Synthes TRAUMA Titanium Cannulated Tibial Nail

Отзывы:

Похожие инструкции для DePuy Synthes TRAUMA Titanium Cannulated Tibial Nail

Бренды по названию

Популярные бренды