Place Metal Bracket on Side Rails (3) over pre-inserted bolts in Headboard (1) and Footboard (2) and hand-tighten
to loosely secure parts together. Do not tighten bolts with M5 Allen Key (B) until you have inserted the Centre Rail
in the next step.
Step One
Step Two
Step by step assembly instructions
3/6
Lower the Centre Rail (6) into the brackets in the centre of the Headboard and Footboard as shown in fig.3. Now
secure the Centre Rail using M6 x 25mm Bolts (G) and tighten with M4 Allen Key (A) as shown in fig.4. You can
now tighten the bolts at the Side Rails from previous step (Step One) with the M5 Allen Key (B) so all fastenings are
now tightened.
M4 Allen Key
x 1
x 1
M5 Allen Key
x 1
M6 x 25mm x 2
G.
A.
A.
B.
Centre Rail
Fi
g
.
3
6
1
2
And
M4 Allen Key(A)
M6 x 25mm (G)
Fig
.
4
6
1
2
And
Bracket
Side Rail
3
1
Bracket
Side Rail
2
3
Fig.1
Fig.2
LOOSELY SECURE PARTS
TOGETHER IN ORDER FOR
CENTRE RAIL TO FIT IN
NEXT STEP
AFTER INSERTING CENTRE RAIL,
TIGHTEN ALL FIXINGS FULLY
INCLUDING BOLTS AT SIDE RAILS
(FROM STEP ONE)
1
3
3
2
6