Step Three
G.
M8 Nut x 4
M13 Spanner x 1
Screw
3.5 x 30mm x 4
M6 x 25mm Bolt
x 8
Legs x 4
8.
7.
Metal plates x 4
M8 Spring Washer
x 4
A.
M4 Allen Key x 1
x2
4/6
J.
I.
K.
H.
For Headboard
M6 x 25mm (G)
2
8
M4 (A)
M6 x 25mm (G)
M6 x 25mm (G)
1
M4 (A)
M6 x 25mm (G)
8
3.5 x 30mm (J)
3.5 x 30mm (J)
M13 Spanner (K)
M8 Nut (I)
M8 Spring
Washer (H)
8
7
1
STEP 1
STEP 2
Attach the Metal Plate (8) to the bottom of Headboard and Footboard using Bolt M6 x 25mm (G)x2. Do not
tighten the bolt until you make adjustment for screw hole at Side Rail. Next, insert Screw 3.5 x 30mm (J) and tighten
the bolt using M4 Allen Key (A). Insert Leg (7) into the bottom of Metal Plate (8) using M8 Spring Washer (H)
and M8 Nut (I). Hold the M8 Nut (I) using M13 Spanner (K) and twist the Leg (7) to secure in place.
Repeat for the other 3 legs.
Yellow sticker
face down
AFTER INSERTING BOLT M6 x 25MM,
MAKE ADJUSTMENT FOR SCREW HOLE,
THEN INSERT THE SCREW 3.5 X 30MM.
THEN TIGHTEN THE BOLT AND SCREW
FIXINGS FULLY.
TWIST WOODEN LEG ONLY
WITHOUT MOVING THE M8 NUT,
SPRING WASHER AND SPANNER
3
3
3
For Footboard
Twist the wooden leg