BASE LEG
TOP LEG
Round Table
Place the spacer on top of the base leg crossbar, and make
sure it drops into place. Then, place the top leg on the spacer,
lining up the holes. Line up the bolt, washers, and nut in order
to sandwich the legs and hold everything in place. Using the
wrench to hold the nut still, turn the bolt with the Allen Key
until tightly fastened.
NOTE: The base leg has a lower crossbar than the top leg.
x1
x1
x1
ROUND
TABLE TOP
x4
HAND SCREW
x1
BOLT
x2
WASHER
x1
SPACER
x1
NUT
Holds up to
300 lb (136 kg)
1
2 People
Required
x1
17MM WRENCH
x1
5MM ALLEN KEY
REQUIRED TOOLS
(Included)
