6
_______________________________________________________________________
Step Five
Fittings
_________________________________________________________________________
Step Six
Fittings
Locate the Top (A) as shown onto the 4 dowels and secure to the Side panels using 4 x 50mm
Screws (D) ensuring the cornice runs around the front and 2 sides. Screw in 2 x 30mm (G)
Screws into the front of the section
Move the wardrobe close to the position where you intend to use it. Sometimes floors are uneven
and you may need to lean the wardrobe slightly left or right to make the doors sit square inside
the frame (correct position). Once the doors are square (correct position) fit the Back panel (J)
using 21 x 30 mm Screws (F) ensuring the rails run horizontally facing the outside of the cabinet.
First fit the bottom 2 outer screws, then the top 2 outer and finally the remaining screws
D x 4
D
D
D
D
A
F x 21
F
F
F
F
J
G
G
G x 2
