Push the two remaining Dowels (Fixing 4) into the holes in the end of the Drawer trim (Part C).
Insert two Barrel nuts (Fixing 1) into the holes in the underside of the Base (Part D) and ensure that
the slots are aligned correctly (See step 2)
Attach the second End panel (Part A) making sure that the Dowels in the Drawer trim are correctly
fitted in to the holes in the End panel, then insert the four 65mm bolts (Fixing 3) and four 45mm bolts
(Fixing 2) into the holes indicated above.
Stand the Cot upright and place in its final position, ensuring that the Drawer trim (Part C) is facing
away from any walls.
Fully tighten ALL bolts
Part A
5
Cot assembly - step 4
Fixing 1
2 x Fixing 3
Fixing 2
2 x Fixing 4
