I
Base x 2
H
Drawer centre x 1
G
Drawer back x 1
F
Drawer side x 2
E
Drawer front x 1
You will need:
1 x 6mm Allen Key (supplied)
Flat-headed screwdriver
Cross-point screwdriver
Parts (continued)
Take one End panel (Part A) and lay it on edge as shown on a soft surface with the drawer runner
nearest the floor.
Attach one Side panel (Part B) using two 45mm bolts (Fixing 2).
Do not fully tighten the bolts at this stage.
Fixing 2
Cot assembly - step 1
Part B
Part A
3
