John Lewis JLDV 09, Инструкция по эксплуатации

Страница: 29 / 32

Warning! The manufacturer
declines any responsibility for
damage or injury through failure
to comply with the above safety
precautions.
Should the appliance power
supply cable need to be replaced,
this must be carried out by our
Service Centre.
Warning! The power supply
cable must be accessible after
installing the machine.
Permanent connection
In the case of permanent connection it is
necessary that you install a double pole switch
between the appliance and the electricity
supply (mains), with a minimum gap of 3mm
between the switch contacts and of a type
suitable for the required load in compliance
with the current electrical regulations.
The switch must not break the yellow and
green earth cable at any point.
Special accessories
Stacking kit
A special stacking kit is available through your
dealer, to enable the mounting of the dyer on
top of a front loading washing machine with
cover’s depth between 48 and 60 cm. Read
carefully the instructions supplied with the kit.
29