Draining water out after end
of cycle
If you have chosen a programme or an option
that does not empty out the water of the last
rinse, the programme is completed, but:
• The time area shows
and the display
shows the door locked
.
• The indicator of the Start/Pause button starts
flashing.
• The drum still turns at regular intervals to
prevent creases in the laundry.
• The door stays locked.
• You must drain the water to open the door:
1. If necessary, touch the Spin button to decrease
the spin speed proposed by the appliance.
2. Press the Start/Pause button: the appliance
drains the water and spins.
The option indicator Rinse Hold
or
disappears.
If you have set Night
and the
spin speed is not changed, when
you press the Start/Pause button,
the appliance only drains the water.
3. When the programme is completed and the
door locked indicator
goes off, you can
open the door.
4. Press the On/Off button for a few seconds to
deactivate the appliance.
Stand-by function
The Stand-by function automatically deactivates
the appliance to reduce the energy consumption
when:
• You do not use the appliance for 5 minutes
when no programme is running.
Press the button On/Off to activate the
appliance again.
• 5 minutes after the end of the washing
programme.
Press the On/Off button to activate the
appliance again.
The display shows the end of the last
programme.
Turn the programme dial to set a new cycle.
If the dial is rotated to the "Reset" position ,
the appliance automatically turns off in 30
seconds.
If you set a programme or an
option that ends with water in the
drum, the Stand-by function
doesn't deactivate
the appliance
to remind you to drain the water.
Washing Machine User Manual
36
Содержание JLBIWM1404
