John Lewis JLBIWM1404, Руководство пользователя

Страница: 23 / 60

If you touch the Start/Pause button, the
appliance performs only the draining phase.
The appliance empties the water
out automatically after
approximately 18 hours.
Prewash
With this option you can add a prewash phase
to a washing programme.
The corresponding indicator above the touch
button illuminates.
• Use this option to add a pre-wash phase at 30
°C before the washing phase.
This option is recommended for heavily soiled
laundry, especially if containing sand, dust, mud
and other solid particles.
The options can increase the
programme duration.
Extra Soft
Set this option to optimise the fabric softener
distribution and improve fabric softness.
Recommended when you use fabric softener.
This option increases the
programme duration.
The corresponding indicator above the touch
button illuminates.
Permanent Extra Rinse
With this option you can permanently have an
extra rinse when you set a new programme.
To
activate/deactivate
this option, hold the
Extra Soft button pressed for 3 seconds until the
indicator
comes on/goes off on the
display.
When it is activated, the appliance will default to
this option after you switch it off or change/
reset the programme.
This option increases the
programme duration.
Stain
Touch this button to add the stain phase to a
programme.
The corresponding indicator above the touch
button illuminates.
Use this option for laundry with hard stains to
remove.
When you set this option, put the stain remover
into compartment
.
This option increases the
programme duration.
This option is not available with a
temperature lower than 40 °C.
Child Lock
With this option you can prevent children from
playing with the control panel.
To
activate/deactivate this option, hold the
Stain button pressed until the indicator
comes on/goes off on the display.
When it is activated, the appliance will default to
this option after you switch it off or change/
reset the programme. If you press any button,
the indicator blinks to indicate that the
buttons are disabled.
The Child Lock function may not be available for
a few seconds after switching the appliance on.
Delay Start
With this option you can delay the start of a
programme to a more convenient time.
Touch the button repeatedly to set the required
delay. The time increases in steps of 1 hour up
to 20 hours.
The display shows the indicator and the
selected delay time. After touching the Start/
Washing Machine User Manual 23