John Lewis JLBIWM1403, Руководство пользователя

Страница: 35 / 44

To a stand pipe with vent-hole
• Directly into a drain pipe at a height of not less than
60 cm (23.6”) and not more than 100 cm (39.3”).
Refer to the illustration.
• The end of the drain hose must always be ventilated ,
i.e. the inner diameter of the drain pipe (min. 38 mm
- min. 1.5”) must be larger than the external
diameter of the drain hose.
Drain hose end
• If the end of the drain hose looks like this (see the
picture), you can push it directly into the stand pipe.
Without the plastic hose guide.
To a sink spigot
• Refer to the illustration. Put the drain hose in the
spigot and tighten it with a clip.
• Make sure that the drain hose makes a loop to
prevent particles going into the appliance from the
sink.
To a wall-pipe
• Directly to a built-in drain pipe in the room wall and
tighten it with a clip.
You can extend the drain hose to maximum 400 cm. Contact the service centre for the
other drain hose and the extension.
Washing Machine User Manual 35