John Lewis JLBIWM1403, Руководство пользователя

Страница: 19 / 44

Opening the door when a
programme or the delay start
operates
While a programme or the delay start operates,
the appliance door is locked. The Door lock
indicator is on.
Caution! If the temperature
and level of the water in the
drum are too high and/or the
drum still rotates you cannot
open the door.
To open the door during the first few minutes of
the cycle or when the delay start operates:
1. Press the Start/Pause button to pause the
appliance.
2. Wait until the Door lock indicator goes off.
3. Open the door.
4. Close the door and press the Start/Pause
button again. The programme continues.
At the end of the programme
• The appliance stops automatically.
• The acoustic signal operates (if it is activated).
• The display shows .
• The Start/Pause indicator goes off.
• The Door lock indicator goes off.
Turn the programme dial to the Off position to
switch the appliance off.
• You can open the door.
• Remove the laundry from the appliance. Make
sure that the drum is empty.
• Close the water tap.
• Keep the door and the detergent drawer ajar to
prevent mildew and odours.
Draining water out after end
of cycle
The washing programme is completed,
but there is water in the drum:
• The drum turns regularly to reduce creasing.
• The Rinse hold indicator stays on to remind you
to drain the water.
• The Door lock indicator is on. The Start/Pause
indicator flashes. The door stays locked.
• You must drain the water to open the door.
Draining the water:
1. Select the Drain or the Spin programme.
2. Press the Start/Pause button. The appliance
drains the water.
3. When the programme is completed and the
Door lock indicator goes off, you can open the
door.
4. Turn the programme dial to the Off position to
switch the appliance off.
Stand by
If you do not switch the appliance off within a
few minutes of the washing programme coming
to an end, the appliance will enter stand by
mode to save energy.
• All indicators and the display go off.
• The Start/Pause indicator flashes slowly.
Press any button to deactivate the stand-by.
Washing Machine User Manual 19