John Lewis JLBIWM1403, Руководство пользователя

Страница: 28 / 44

Problem Possible solution
Make sure that the inlet hose has no kinks or bends.
Make sure that the connection of the water inlet hose is correct.
The appliance does not fill with
water and drain immediately. Make sure that the drain hose is in the correct position. The hose may be too
low.
The appliance does not drain
the water. Make sure that the sink spigot is not clogged.
Make sure that the drain hose has no kinks or bends.
Make sure that the drain filter is not clogged. If necessary, clean the filter. Re-
fer to "Care and cleaning".
Make sure that the connection of the drain hose is correct.
Set the drain programme if you set a programme without drain phase.
Set the drain programme if you set an option which ends with water in the
tub.
The spin phase does not oper-
ate or the washing cycle lasts
longer than usual. Set the spin programme.
Make sure that the drain filter is not clogged. If necessary, clean the filter. Re-
fer to "Care and cleaning".
This may be caused by balance problems. Adjust the items in the tub manually
and start the spin phase again.
There is water on the floor. Make sure that the couplings of the water hoses are tight and there is no wa-
ter leakage.
Make sure that the drain hose is not damaged.
Make sure you use the correct type and quantity of detergent.
You cannot open the appliance
door. Make sure that the washing programme is finished.
Set the drain or the spin programme if there is water in the drum.
The appliance makes an unusu-
al noise. Make sure the levelling of the appliance is correct. Refer to installation leaflet.
Make sure that the packaging and/or the transit bolts are removed. Refer to
installation leaflet.
Add more laundry to the drum. The load may be too small.
Washing Machine User Manual 28