John Lewis JLBIOS610, Инструкция по эксплуатации

Страница: 32 / 40

Installation instructions
Important! IMPORTANT
The new appliance may only be installed and
connected by a qualified installation
engineer. Please comply with this instruction.
If you do not, any damage resulting is not
covered by the warranty.
Safety information for the installer
• The set-up of the electrical installation is
arranged so that the appliance can be
isolated from the mains with a minimum 3
mm all-pole contact separation. Suitable
isolation devices include, for example,
circuit breakers, fuses (screw type fuses
are to be removed from the holder),
RCDs and contactors.
• Anti-shock protection must be provided
by the installation.
• The built-in unit must meet the stability
requirements of DIN 68930.
• Built-in cookers and cooking surfaces are
equipped with special attachment
systems. For safety reasons, they must
only be combined with appliances from
the same manufacturer.
The use of heat protection strips is
prohibited for cookers and ovens with
Pyrolytic, if the recess has a rear wall and
closed ground-level compartment.
However installation is possible with a
ground-level compartment that has been
shortened by at least 20 mm and which has
base ventilation of the same cross-section.
32