background image

Cooker hood user guide

17

To assist in locating possible faults use the help guide below:

Troubleshooting

Problem

Cause

Correction

Light not working

The LED lights are not working

The LED string is loose.

Switch off the cooker hood, then see page 14 
for details of how to connect the LED string.

The LED string is burned out.

Contact your local John Lewis branch.

No electric current is reaching the cooker 
hood.

Check that the cooker hood is plugged in and 
the power is on.
Replace the fuse. If you are unsure how to 
replace a fuse consult a quali

fi

 ed electrician.

Cooker hood not operating effectively

The cooker hood is not working 
effectively.

The fan speed is too low.

Select a higher fan speed.

The 

fi

 lter needs cleaning or replacing.

Clean or replace the 

fi

 lter.

The air discharge outlet may be blocked.

Check the air discharge outlet and clear any 
blockages.

Oil or fat collects on the 

fi

 lter. 

The 

fi

 lter needs cleaning or replacing.

Clean or replace the 

fi

 lter.

Cooker hood will not operate

The cooker hood has switched 
off unexpectedly during 
operation.

The cooker hood has overheated.

Switch off the cooker hood and wait until it 
has cooled down.

The cooker hood is too close to the hob.

Re-site the cooker hood at the correct height.

No electric current is reaching the cooker 
hood.

Check that the power is still on.
Replace the fuse. If you are unsure how to 
replace a fuse consult a quali

fi

 ed electrician.

The cooker hood will not start.

The cooker hood is not plugged in or the 
power is off.

Check that the plug is 

fi

 rmly pushed in and the 

power is on.

No electric current is reaching the cooker 
hood.

Check that the power is still on.
Replace the fuse. If you are unsure how to 
replace a fuse consult a quali

fi

 ed electrician.

If none of the above suggestions resolve the problem please contact your local John Lewis branch. Never attempt to repair the 
cooker hood yourself. 

Note: 

The cooker hood must only be repaired by a quali

fi

 ed registered service person. 

Troubleshooting

Содержание JLBIHD520





















Отзывы: