John Lewis JLAFFS2008, Инструкция по эксплуатации

Страница: 8 / 40

OR
1
2
3
Electrical connection
Any electrical work required to install this
appliance should be carried out by a qualified
electrician or competent person.
Warning! THIS APPLIANCE MUST
BE EARTHED.
Should the appliance power supply
cable need to be replaced, this must be
carried out by a Service Force agent.
The manufacturer declines any liability
should this safety measure not be
observed.
Before switching on, make sure the electricity
supply voltage is the same as that indicated on
the appliance’s rating plate.
The appliance is supplied with a 13amp plug
supplied. In the event of having to change the
fuse in the plug supplied, a 13amp ASTA
approved BS 1363/A fuse must be used.
Should the plug need to be replaced for any
reason, proceed as described below. The
wires in the mains lead are coloured in
accordance with the following code:
Green and yellow - Earth
Blue - Neutral
Brown - Live
If you fit your own plug, the colours of the
wires in the mains lead of your appliance may
not correspond with the markings identifying
the terminals in your plug.
Proceed as follows:
1. Connect the green and yellow (earth)
wire to the terminal in the plug which is
marked with the letter "E" or the earth
symbol or coloured green and yellow.
2. Connect the blue (neutral) wire to the
terminal in the plug which is marked with
the letter "N" or coloured black.
3. Connect the brown (live) wire to the
terminal in the plug which is marked with
the letter "L"or coloured red.
8