John Lewis JLAFFS2008, Инструкция по эксплуатации

Страница: 16 / 40

Vacation mode is manually activated when the
red indicator is lit.
water filter - Touch to display filter
condition status. Press and hold for three
seconds to reset.
air filter - Touch to display filter status. Press
and hold for three seconds to reset.
temp display - When active, it allows the
display of the freezer and fridge temps during
“Sleep Mode”. The temperature is displayed
when the red indicator is lit.
temp mode - Touch to toggle display from
Fahrenheit to Celsius.
mute sounds - Tones emitted by each
keypress can be turned off based on user
preference. The sounds are muted when the
red indicator is lit. Warning signals will stay
active.
factory default - Resets all refrigerator
settings such as temp, temp display, and alarm
tones to their factory default settings.
on off - Press and hold for three seconds to
turn off the cooling system to clean the
refrigerator. It also turns off all dispenser
functions. The temperature display will read
OFF.
Important! Pressing the system off icon
does not turn off power to your refrigerator.
You must unplug the power cord from the
wall outlet.
Setting cooling
temperatures
1. Touch the glass panel to illuminate the
2
nd
level of display.
2. Select the options icon. Plus (+) and minus
(-) indicators will appear on either side of
the displayed temperatures.
3. Press the + or – indicator to adjust the
temperature to the desired setting.
The temperature display will begin to blink
with the first touch. After five seconds of
inactivity, the display will beep to accept
the new temperature. After 10 seconds,
the display times out and returns to the
basic display.
Alarms
Door ajar - If the door has been left open for
an extended period of time, an alarm will
sound and the door ajar indicator will display
in the middle. The alarm is turned off by
closing the door. The
alarm off key will
illuminate to prompt the reset of any pending
alarms. Press this key to reset any system
Alarms.
High temp - In the event of a high
temperature condition, the temperature
display will display “HI”. After 20 minutes, the
high temp alert will be displayed and the
alarm off icon will illuminate until pressed,
acknowledging the alarm, at which time the
highest temperature reached will be displayed
and the refrigerator will resume normal
operation. All other modes are turned off until
the alarm is acknowledged.
Power fail - In the event of a power failure,
the power fail alert will be displayed and the
alarm off key will be illuminated and you will
hear an audible alarm until the alarm off icon
is pressed, acknowledging the alarm. Other
modes may be turned off until the alarm is
acknowledged. When the
power fail alert is
turned off, the refrigerator will resume normal
16