1
This kit provides the parts and instructions required to replace
a TS100 Target Stand Caster Assembly.
Contents
See
Figure 1
for reference.
•
A
- (4) Carriage Bolt (5/16-18 x 3/4 in.)
•
B
- (4) Locknut (5/16-18 in.)
•
C
- (1) Caster Assembly
General Safety Information
Risk of personal injury, unsafe conditions and equipment
damage.
•
Before repairing this unit, read this instruction sheet
completely.
•
Follow and perform these instructions as written.
•
Use the proper personal protective safety equipment and
tools as applicable for the work you are performing.
•
Use a helper when lifting, handling and assembling heavy
and large parts.
•
Avoid pinching your fingers when sliding or moving parts.
•
Check and replace all damaged and worn parts as
required before returning the unit back into operation.
Not following these repair and safety instructions can result in
personal injury, unsafe conditions and equipment damage.
Repair Instructions
Removal
(See
Figure 1
for reference.)
1. Rotate and secure the cross beam into the vertical
storage position.See “
Rotating/Storing the Cross Beam
”
in the ADAS Recalibration System User Guide for
instructions.
2. In order to replace the caster assembly, the unit must be
positioned on it’s side. With the assistance of a helper,
position the unit on it’s side in a manner that avoids
damaging the unit. Ensure the unit is secure before
performing the repair.
3. Remove and discard the existing caster assembly, by
removing the four locknuts and carriage bolts securing it
to the base assembly.
Installation
(See
Figure 1
for reference.)
1. Install the replacement caster assembly (
C
) using the
supplied carriage bolts (
A
) and locknuts (
B
). Position the
head of the carriage bolt into the base assembly and
tighten the locknuts to 11 lb-ft. (15 Nꞏm).
Figure-1
2. With the assistance of a helper, return the unit to it’s
normal upright position.
3. Move the unit on it’s casters and ensure they swivel and
roll freely without binding.
4. Check the lock function of the casters for proper
operation.
8"3/ */(
A
B
C
X4
X4
Caster Service Kit
TM
EAK0366L01A Rev. A
© 2019 IDSC Holdings, LLC. All Rights Reserved. All pictures and illustrations shown are for
reference purposes only. All information including specifications herein are subject to change
without notice. IDSC Holdings, LLC, 2801 80th Street, Kenosha, WI 53143
EAZ0139L60A Rev. A 10-M-19
Содержание EZ-ADAS
Страница 1: ...TM ServiceParts Manual EAZ0139L70ARev A ...
Страница 2: ...NOTES ...
Страница 14: ...12 NOTES ...
Страница 15: ...TM Index ...
