John Bean EHP System I, Руководство по эксплуатации

Страница: 25 / 28

- Page 25 -
EHP Series Operation Instructions
7.0 MAINTENANCE
BEFORE STARTING ANY MAINTENANCE OPERATION
ENSURE THAT THE MACHINE IS DISCONNECTED FROM
THE AIR AND ELECTRIC SUPPLY.
A. Periodically clean the vertical hexagonal rod with
nonflammable liquid detergent.
After this immediately lubricate with a light lubricating
oil (Fig.27).
538
Fig.27
B. Periodically clean all moving metal parts and lubricate
with oil.
C. Weekly clean the teeth of the clamps (1) with a wire
brush, check the nylon clamping jaw insert and (2)
replace if worn (Fig.28).
346
Fig.28
D. Inspect and replace as necessary the plastic mount/
demount head insert. The insert is held in place by a
small roll pin. Drive the pin out with a punch, replace
after new insert is installed.
E. Lubricate piston rods of turntable air cylinders with
oil as needed.
F. Periodically wash all plastic parts with cold water and
soap or window cleaner.
G. Check the bead breaker pads. Replace if worn.
H. Discharge water from air filter every day.!! (Do this by
turning the knob “B” clockwise and upward. Water will
automatically be discharged.) (see ‘B’ at Fig.29).
I. Check the automatic air lubricator oil level weekly.
When adding oil to the lubricator, disconnect the air
supply first, remove the fill screw ‘A’, and add oil as
needed. Make sure seals are in place when replacing
the cap.
553
Fig.29
NOTICE!
USE ONLY OILS FOR AIR DEVICES, DO NOT USE BRAKE
FLUID OR OTHER NON SUGGESTED LUBRICANTS.
Suggested oils for the filter/lubricator unit:
TAMOIL: WHITE MINERAL OIL 15
SHELL: ONDINA OIL 15
BP: ENERGOL WT 3
TOTAL: LOBELIA SB 15
ESSO: MARCOL 82
Water Separator Filter
Automatic Air Oiler
1
2
For Reference Only
For Current Info See Equiserv.com