CLUSTER PROGRAMMING
Setting clusters / UHF input
- The amplifier has 3 UHF inputs which are splitted over 10 clusters.
There are three possible configurations :
To set the number of cluster(s) per input :
- Turn the button to select
Split UHF
mode.
Split UHF
- Push the button to confirm.
Input
Number of
cluster(s)
UHF1
2
2
2
UHF2
8
7
5
UHF3
0
1
3
The LED is green.
- Turn the button to set one configuration :
Split UHF
The LED is red.
Notes :
- UHF1 is set for 2 clusters, UHF2 and UHF3 are set for different number of cluster(s).
- Each cluster can be switched off (Park function).
For example if you only need one cluster for UHF1, set the second cluster on channel 00 to switch it off
(see following paragraph "Setting channels / cluster").
- Push the button to confirm.
Split UHF
The LED is green.
UHF1 clusters are indicated by the YELLOW LEDs n° 1 and 2.
UHF2 clusters are indicated by the RED LEDs n° 3, 4, 5, 6, 7 and 8.
UHF3 clusters are indicated by the GREEN LEDs n° 6, 7 and 8.
9
Display of selected configuration :
Input
Number of
cluster(s)
Display
"8.0"
"7.1"
"5.3"
UHF2
8
7
5
UHF3
0
1
3
1
2
3
4
5
6
7
8
9
10
UHF Clusters
I-II
III
UHF1 cluster indicator
UHF2 cluster indicator
UHF3 cluster indicator
