- Tourner le bouton pour sélectionner le mode
Select Filter.
- Appuyer sur le bouton rotatif pour accéder au mode sélectionné.
- Dans ce mode, tourner le bouton pour sélectionner le cluster à régler.
Le mode est indiqué
par une LED VERTE
La LED est à présent ROUGE
Affichage
= LED VERTE
= LED ROUGE
Répéter cette section pour régler tous les clusters.
Configurer les canaux par cluster
Chaque cluster a une largeur de bande programmable de 1 à 7 canaux :
Pour configurer les canaux par cluster :
Select Filter
1
2
3
4
5
6
7
8
9
10
UHF Clusters
I-II
III
- Tourner le bouton pour sélectionner le mode
Start Channel
(Canal de Début).
- Appuyer sur le bouton rotatif pour accéder au mode sélectionné.
La LED est à présent ROUGE
Start Channel
Start Channel
- Tourner le bouton pour sélectionner le canal le début.
Affichage
- Tourner le bouton pour sélectionner le mode
Stop Channel
(Canal de Fin).
- Appuyer sur le bouton rotatif pour accéder au mode sélectionné.
Stop Channel
- Tourner le bouton pour sélectionner le Canal de Fin ( Stop Channel).
Stop Channel
Select Filter
- Appuyer sur le bouton pour confirmer.
- Appuyer sur le bouton pour confirmer.
Start Channel
LED n° 1
La LED est VERTE
La LED est VERTE
La LED est VERTE
Stop Channel
Dans l'exemple suivant le cluster 1 est réglé du canal 22 au canal 26.
Select Filter
La LED est VERTE
La LED est à présent ROUGE
- Appuyer sur le bouton pour confirmer.
La LED est VERTE
27