Johannus LiVE III AGO, Руководство пользователя

Страница: 43 / 52

User Manual LiVE III AGO 44
MIDI Specifications
This paragraph describes the specifications on the MIDI Implementation Chart in
more detail.
Default basic channels (transmitted/recognized)
7:
Pedal
8: Manual I
9: Manual II
10: Manual III
16: Accessories
Basic channel changes (transmitted)
Can be programmed through the MIDI Config. See § 5.5.5 MIDI Config.
Control changes (transmitted)

Controller 7 (07h) General volume, with volume values 40 (28h) –
127 (7Fh).

Controller 11 (0Bh) Swell pedal, with volume values 55 (37h) – 127
(7Fh).

Controller 6 (06h) Fine Tune, with Fine Tune values 33 (21h) - 95 (5Fh).
Fine Tune value 64 (40h) = A = 0 cents.
The following applies to the Fine Tune:
LSB 100 (64h) 1 (01h) and the MSB 101 (65h) 0(00h).
Transposer, with transposer values 56 (38h) - 72 (48h).
Transposer value 64 (40h) = A = center.
The following applies to the transposer:
LSB 100 (64h) 2 (02H) and the MSB 101 (65h) 0(00h).
Control changes (recognized)

Controller 7 (07h) General volume, with volume values 0 (00h) –
127 (7Fh). Volume values less than 40 (28h) are treated
as 40 (28h).

Controller 11 (0Bh) Swell pedal, with volume values 0 (00h) – 127
(7Fh). Volume values less than 55 (37h) are treated as
55 (37h).
Program changes (transmitted/recognized)
Organ stops: Depends on the number of stops and the sequence of stops.
MIDI stops (programmable): 1-128. See § 5.5.5 MIDI Config.
System exclusive messages (transmitted/recognized)
Each ‘sys ex’ (system exclusive) message largely looks the same. The first 7 bytes
and the last byte are always the same. Only the value of the 8th byte varies. This
is the ‘sys ex message’ that Johannus generally uses: F0 00 4A 4F 48 41 53 XX F7
(hexadecimal). The ‘sys ex messages’ described below only indicates the value of
the 8th byte (XX) and the output from which it is transmitted.