Johannus LiVE III AGO, Руководство пользователя

Страница: 30 / 52

User Manual LiVE III AGO 31
4. Press the ENTER-piston. When data is being sent,
Busy...
appears on the
display.
5. After the text
Uploading successful
and
Reboot the organ
turn the organ off and on again.
5.5.3 Expression Pedals
The organ is equipped with PEPC™ (Programmable Expression Pedal
Configuration). This function makes it possible to configure each expression pedal
to one’s own discretion.
We distinguish two types of expression pedals:
Swell pedal:
dynamics by increase or decrease of volume. In a pipe organ
this is achieved by closing or opening the swell shutters of a
swell box. See also § 4.2 Expression pedal.
Crescendo pedal: dynamics by increasing or decreasing the amount of stops. See
also § 4.10 Crescendo Pedal.
1.
Press the MENU-piston.
2. Use the – and + pistons to select the
Organ Settings
function on the
display.
3. Press the ENTER-piston. A list with available Organ Settings appears on the
display.
4. Use the - and + pistons to select the
Expression Pedals
function on
the display.
5. Press the ENTER-piston. The available expression pedals appear on the
display.
6. Use the - and + pistons to select the expression pedal of which the function
must be changed.
7. Press the ENTER-piston. The available possibilities appear on the display.
Behind the possibilities the current setting is marked with a ‘√’.
8. Use the - and + pistons to select the desired setting.
I:
Expression pedal for Manual I
II:
Expression pedal for Manual II
III:
Expression pedal for Manual III
Cresc:
Crescendo Pedal
9. Press the ENTER-piston. The pointer jumps to the chosen position.
10. Use the - and + pistons to select the functionality.
11. Press the ENTER-piston for confirmation.
12. Press the MENU piston to return to the Expression Pedals menu.
13. If necessary, repeat steps 6 to 12 for another expression pedal.
14. Press the MENU piston three times to exit the Johannus Menu.
a. An expression pedal can be configured for several divisions at the same
time.
b. A division can only be connected to one expression pedal at the same
time.
c. An expression pedal cannot be configured as an expression pedal and a
crescendo pedal at the same time.