Joemeek Fathead, Руководство пользователя

Страница: 7 / 22

User's guide
HINT: The tuner output is not muted, so check your tuning when you change
instruments by pressing mute, and using your tuner normally!
HINT: You may want to send the PA both an 'on stage' sound as well as a
clean one, feel free to use both the second output and DI outputs for greater
flexibility.
HINT: If you use extra effects, i.e. delay, chorus etc, use them in the Insert
point of the Fathead to increase the quality of your overall sound. To do
this, use a stereo to two mono jack ‘Y’ cable.
Use with a microphone
The Fathead features JOEMEEK's CurrentSense mic pre, so you can record
and perform with all manner of acoustic instruments. Acoustic players will
find the Fathead superb on stage as a quality pre amp that also gives great
control over your sound.
HINT: The Fathead is extremely sensitive; when using live, feedback can
often be a problem. Be careful with compression, this can actually make
feedback worse! Always start with low gain, and no compression, and add
volume slowly.
HINT: For a more natural sound, remember to only boost frequencies that
are present; avoid excessive bass and HF boost with acoustic instruments.
HINT HINT
HINT HINT
HINT HINT
HINT HINT
HINT HINT
JOEMEEK FATHEAD VC8 Designed and manufactured in England by FLETCHER ElectroAcoustics Ltd.
CAUTION!
Removal of covers will
expose dangerous
voltages even
when power is removed!
No user serviceable parts
inside. Service strictly by
qualified personnel only.
Approved components
used.
CONTROLLER
PRE
MODE DI GAIN
DI OUTPUT INSERT TUNER LINE IN MIC IN MAIN OUTPUT
OUT 1 OUT 2 (POST MUTE) (PRE MUTE) TIP: RETURN
RING: SEND
POST
GROUND LIFT
stage sound PA sound
Acoustic instrument/
microphone source
Getting started
6