User's guide
8
Rear Panel
Ground Lift
When button is out, the mains earth is disconnected from the
unit.
LEAVE PRESSED IN FOR NORMAL OPERATION
, it
is generally safer to have the mains earth connected to electrical
equipment.
Main Output
Dual balanced line level outputs for the main signal. Connect
to your main listening/recording equipment.
DI Output
Secondary balanced output with switchable signal source
DI Gain/Mode
Controls the output gain of the DI out. DI mode (PRE)
causes the DI output to send a 'clean' signal, before the distortion,
compressor and EQ. DI mode (POST) causes DI output similar to
the main output but controlled by the DI gain control. See system
diagram for more information.
FATHEAD controller
Connection point for the supplied footswitch
Insert Send/Return signal breakpoint. Allows access to the signal
before the compressor and EQ, but after distortion.
Tuner
Constant output for connection to tuner device.
Line in
Unbalanced input.
Mic In
CurrentSensing microphone input.
Digi Upgrade
Cover plate for optional digital card upgrade.
Footswitch
The Fathead controller footswitch may be connected to give the musician
easy access to bypass/enable the compressor/distortion/EQ and mute
functions. Simply attach the footswitch with the supplied cable, and
enable/disable the Fathead functions as required.
JOEMEEK
FATHEAD
VC8
Designed and manufactured in England by FLETCHER ElectroAcoustics Ltd.
CAUTION!
Removal of covers will
expose dangerous
voltages even
when power is removed!
No user serviceable parts
inside. Service strictly by
qualified personnel only.
Approved components
used.
CONTROLLER
PRE
MODE
DI GAIN
DI OUTPUT
INSERT TUNER
LINE IN
MIC IN
MAIN OUTPUT
OUT 1
OUT 2
(POST MUTE)
(PRE MUTE)
TIP: RETURN
RING: SEND
POST
GROUND LIFT
Using the Fathead
Содержание Fathead
Страница 1: ...User s guide User s guide JOEMEEK JOEMEEK ...
Страница 2: ...User s guide ...