Joemeek C2, Руководство пользователя

Страница: 10 / 17

C2 Stereo Compressor- User's guide
C2 10
TIPS ON USE
Whatever type of compression is needed, the most important control is the Input
Gain. This sets the volume level into the compression circuits. If too little is fed to
the compressor then compression sounds will be weak. DO NOT BE AFRAID TO
DRIVE PLENTY OF INPUT. The VU level LEDs are designed to work up to the +8
point. When the 'overload' LED flashes on, this is a warning to go no louder; stay at
that level!
VOICES
The compressor adds stability and depth to solo voices Over compression with fast
attack times on voice will change the apparent tonal quality so listen carefully! Try
recording first with a little compression, then adding more at a different release time
on the mix. A good starting point for solo voice compression is ; Attack 7mS,
Release 1.7 secs. drive the compression so that only one yellow LED lights steadily.
PIANO
Try setting attack at not less than 2mS and release at about 0.5secs to 1 sec.
Tricky, use it very gently unless you want unusual effects! Keep the compression
control low so that not more than 2 yellow LEDs light.