Joemeek C2, Руководство пользователя

Страница: 7 / 17

C2 Stereo Compressor- User's guide
C2 7
CONNECTIONS
Inputs and outputs are balanced, line level, and are designed to be operated either
balanced or unbalanced modes.
CAUTION! When using unbalanced sources (sound cards, digital work stations,
unbalanced output mixers) use conventional 2 pole jacks, ie; tip and sleeve. Only use 3
pole jacks for balanced operation.
OPERATION
•
Connect inputs and outputs and plug in 12VAC power adapter provided.
•
When the unit is powered, a green LED just to the right of the output volume control
will be illuminated. When the 'compress' switch is pressed, a blue LED will light to
indicate that compression is active; set compression to 'off' (switch out)
•
Set the 'ATTACK' control to 4mS and the 'RELEASE' control to just above minimum.
•
Set 'OUTPUT' control to minimum
•
Feed some programme material into the unit and set the 'INPUT GAIN' so that the
row of LEDs on the right hand side of the unit come alight up to the +4 level. This
shows that there is sufficient signal in the C2 to compress.
•
Set the output to match the equipment being driven. (professional studio equipment
is no4 or 0dB. less expensive equipment is often -10dB) Vary this control so
that there is the right amount of signal being fed to the equipment being driven.
•
Press the 'Compress' switch so that the blue LED is alight and turn up the
compression control until one or two of the yellow 'compression' LEDs start to light
The compressor is now working.
•
Adjust the attack, release and compression controls to get the effect required.