jobmate 99-2973-8, Инструкция по эксплуатации

Страница: 19 / 25

19
MAXIMUM FILL LINE
WARNING: Do not allow the dust
container to get too full when
vacuuming up liquids.
See the maximum fill line (1) on the left
side of the dust container (Fig. 11). Always
empty the container before the liquid
reaches the maximum level. An over-filled
dust container will damage the motor.
WARNING:
When servicing, use
only identical replacement parts. Use of
any other part may create a hazard or
cause product damage.
DO NOT abuse power tools. Abusive
practices can damage the tool as well as
the workpiece.
WARNING:
DO NOT attempt to
modify tools or create accessories. Any
such alteration or modification is
misuse and could result in a hazardous
condition leading to possible serious
injury. It will also void the warranty.
CLEANING
DO NOT use solvents when cleaning
plastic parts. Most plastics are susceptible
to damage from various types of
commercial solvents and may be damaged
by their use. Use a clean cloth to remove
dirt, dust, oil, grease, etc.
WARNING:
Do not at any time
allow brake fluids, gasoline, petroleum-
based products, penetrating oils, etc. to
come in contact with plastic parts. They
contain chemicals that can damage,
weaken or destroy plastic.
LUBRICATION
All of the bearings in this vacuum are
lubricated with a sufficient amount of high-
grade lubricant for the life of the unit under
normal conditions. Therefore, no further
lubrication is required.
!
MAINTENANCE
!
!
!
ASSEMBLY AND OPERATION
Fig. 11