WARNING
WARNING
ELECTRICAL INFORMATION
DOUBLE INSULATED
This grass trimmer has a plug that looks like the one shown in Fig. 1.
The grass trimmer is double insulated to provide a double thickness of insulation between you and
the tool’s electrical system. All exposed metal parts are isolated from the internal metal motor
components with protective insulation.
USE ONLY IDENTICAL REPLACEMENT PARTS WHEN SERVICING THE GRASS TRIMMER,
TO AVOID INJURY.
Fig. 1
6
TO AVOID ELECTRICAL HAZARDS, FIRE HAZARDS, OR DAMAGE TO THE TOOL, USE PROPER
CIRCUIT PROTECTION. YOUR GRASS TRIMMER IS WIRED AT THE FACTORY FOR 120 V
OPERATION. CONNECT TO A 120 V, 15 A CIRCUIT, AND USE A 15 A TIME-DELAYED FUSE OR
CIRCUIT BREAKER. TO AVOID SHOCK OR FIRE, IF THE EXTENSION CORD IS WORN, CUT OR
DAMAGED IN ANY WAY, REPLACE IT IMMEDIATELY.
TO REDUCE THE RISK OF ELECTRIC SHOCK, THIS APPLIANCE HAS A POLARIZED PLUG
(ONE BLADE IS WIDER THAN THE OTHER) AND WILL REQUIRE THE USE OF A POLARIZED
EXTENSION CORD. THE APPLIANCE PLUG WILL FIT INTO A POLARIZED EXTENSION CORD
ONLY ONE WAY. IF THE PLUG DOES NOT FIT FULLY INTO THE EXTENSION CORD, REVERSE
THE PLUG. IF THE PLUG STILL DOES NOT FIT, OBTAIN A CORRECT POLARIZED EXTENSION
CORD. A POLARIZED EXTENSION CORD WILL REQUIRE THE USE OF A POLARIZED WALL
OUTLET. THIS PLUG WILL FIT INTO THE POLARIZED WALL OUTLET ONLY ONE WAY. IF THE
PLUG DOES NOT FIT FULLY INTO THE WALL OUTLET, REVERSE THE PLUG. IF THE PLUG
STILL DOES NOT FIT, CONTACT A QUALIFIED ELECTRICIAN TO INSTALL THE PROPER WALL
OUTLET. DO NOT CHANGE THE EQUIPMENT PLUG, EXTENSION CORD RECEPTACLE, OR
EXTENSION CORD PLUG IN ANY WAY.
