Joab EcoDrive VL10U, Руководство по эксплуатации и обслуживанию

Страница: 27 / 57

To select the desired function mode, simply press button 12 on the radio controller. By default,
Function_1 mode is active at start-up.
The LED next to button 12 indicates which function mode is active, see Table 4 , on page 20. If
Function_1 or Function_2 is active the LED for button 12 is not illuminated. If the LED is illu-
minated, Function_3 or Function_4 mode is active.
Radio Controller - Button Functions
Listed below is an overview of the buttons and their functions in relation to which function mode
is selected. Optional functions are marked with an asterisk.
Button Function_1
(Lift-1) Function_2
(Lift-2) Function_3*
(Safety wires) Function_4*
(Weight)
1 Lifting arm – UP /
fast operation* Lifting arm – UP
fast operation* Front left safety
wire – IN --
2 Lifting arm –
DOWN Lifting arm –
DOWN Front left safety
wire – OUT Axle 1
3 Folding arm – UP Folding arm – UP Front right safety
wire – IN --
3 & 4 Container Shake Container Shake -- --
4 Folding arm –
DOWN Folding arm –
DOWN Front right safety
wire – OUT Axle 2
5 Left support leg –
OUT Left support leg –
OUT Rear left safety
wire – IN --
6 Left support leg –
IN Left support leg –
IN Rear safety wire –
OUT Axle 3
7 Right support leg –
OUT Right support leg –
OUT Rear right safety
wire – IN --
8 Right support leg –
IN Right support leg –
IN Rear right safety
wire – OUT Axle 4
9 Extending body –
OUT* Rotator – CW* -- Net weight
10 Extending body –
IN* Rotator – CCW* -- Gross weight
11 Tipping hook Rotator – lock* -- --
12 Function mode
DMG (see below) Function mode
DMG (see below) Function mode
DMG (see below) Function mode
DMG (see below)
Table 5: Radio Controller - Button Functions
21
Radio Controller | Operation
EcoDrive VL10-VL18 manual: 1021046 Edition 2 | 2022-05-02