Joab EcoDrive VL10U, Руководство по эксплуатации и обслуживанию

Страница: 16 / 57

To select the desired Function mode, simply press button 12 after start-up. By default, Func-
tion_1 mode is active at start-up. There are three LEDs on the button. The first LED is illu-
minated when Function_1 mode is active, the first and second LED for Function_2 mode, and
all three LEDs when Function_3 mode is active.
Control Panel - Button Functions
Listed below is an overview of the buttons and their function in relation to which function mode
is selected. Not all functions are standard. Optional functions are marked with an asterisk.
Button Function_1
(Lift-1) Function_2
(Lift-2) Function_3*
(Safety wires)
1 Lifting arm – UP
Fast operation: + button
11 Lifting arm – UP
Fast operation: + button
11 Front left safety wire –
IN
2 Lifting arm – DOWN Lifting arm – DOWN Front left safety wire –
OUT
3 Folding arm – UP Folding arm – UP Front right safety wire –
IN
3 & 4 Container Shake Container Shake --
4 Folding arm – DOWN Folding arm – DOWN Front right safety wire –
OUT
5 Left support leg – OUT Left support leg – OUT Rear left safety wire – IN
6 Left support leg – IN Left support leg – IN Rear safety wire – OUT
7 Right support leg – OUT Right support leg – OUT Rear right safety wire –
IN
8 Right support leg – IN Right support leg – IN Rear right safety wire –
OUT
9 Extending body – OUT* Rotator – CW* --
10 Extending body – IN* Rotator – CCW* --
11 Tipping hook Rotator – lock* --
12 + 11 Adjust the operation speed of the Skip-Loader. See "Turtle Mode – Fast
speed", on page 11 .
12 Function mode
DMG (see below) Function mode
DMG (see below) Function mode
DMG (see below)
Table 1: Control Panel - Button Functions
10
Operation | Control Panel
EcoDrive VL10-VL18 manual: 1021046 Edition 2 | 2022-05-02