Joab EcoDrive Hook-Lift L Скачать руководство пользователя страница 35 | Manualshive

Страница: 35 / 45

background image

29

Safety Warnings

The EcoDrive Hook-Lift has a number of safety labels attached to it, as shown below. It is
important to read and adhere to these warnings. Failure to do so can lead to serious injury or
damage to equipment.

Make sure that the labels are in good condition. If necessary, new safety labels can be
ordered from JOAB.

Safe Working Distance

Make sure that there are no unauthorised persons in close
proximity of the EcoDrive Hook-Lift's working area. The risk
zone is 8 metres in all directions of the EcoDrive Hook-Lift and
body.

Working on the Hook-Lift

Never work under a hook-lift without the use of the tip-sup-
ports. Make sure that the body is removed from the hook-lift
and that the tip-supports are mounted correctly so that they
support the hook-lift, before carrying out any work.

Park the Hook-Lift before driving the Vehicle

Make sure the hook lift is parked before driving the vehicle.
Failure to do so can lead to serious injury or damage. There is
a serious risk that the hook will make contact with the envir-
onment if it is not parked.

Risk of Slipping

Be aware when operating the hook-lift that there may be a risk of slipping, that
could lead to injury.

Suspended Loads

Do not stand or walk underneath a suspended load. If a suspended load
breaks free it can lead to serious injury or death.

Risk of being Trapped

Be aware that there is a serious risk of becoming trapped when operating the
hook-lift. Always verify that there is no risk of anyone becoming trapped or
injured before operating the hook-lift.

Service Instruction: EcoDrive | 13301 Edition 1b | 2019-02-31

«
...
33
34
35
36
37
...
»

Содержание EcoDrive Hook-Lift L














































Отзывы:

Нет отзывов

Похожие инструкции для EcoDrive Hook-Lift L

Бренд: Abicor Binzel Страницы: 42

Бренд: Nelson Страницы: 18

Бренд: Nelson Страницы: 150

Бренд: OBSIDIAN CONTROL SYSTEMS Страницы: 13

Бренд: SanRex Страницы: 4

Бренд: ShoreStation Страницы: 15

Sysmac NX-TBX01

Бренд: Omron Страницы: 172

SUPERIOR TIG 242

Бренд: Telwin Страницы: 108

PLATINUM PS-9003

Бренд: HydroQuip Страницы: 24

MMA-300/2 PROFI

Бренд: Zenit Powertools Страницы: 10

Бренд: Cairox Страницы: 16

RAZOR CUT 40 AIR

Бренд: Unimig Страницы: 28

Бренд: Thermo Scientific Страницы: 68

Бренд: gala gar Страницы: 42

INCA STD 13-16-19

Бренд: M.J. MALLIS GROUP Страницы: 28

Бренд: Vector Welding Страницы: 17

Бренд: Parweld Страницы: 16

ISaGRAF VP-2117

Бренд: ICP DAS USA Страницы: 75

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды