Joab EcoDrive Hook-Lift L Скачать руководство пользователя страница 27 | Manualshive

Страница: 27 / 45

background image

21

Service Instruction: EcoDrive | 13301 Edition 1b | 2019-02-31

Group 4 – Inspection and Adjustment

4:20

Inspect the hook-lift's entire frame work for damage, as listed below:

1. Check for damage in the frame work, such as cracks etc..

2. Inspect all welded fastening points for damage to the welding.

3. Inspect all welded joints for signs of damage.

4:21

Inspect the hook-lift's main-valve-block, as shown and listed below. The main-valve-
block is located behind the driver's cab, on the right side of the bulk-head, behind a
plastic cover, as shown below.

1. Turn the vehicle and hook-lift OFF.

2. Remove the plastic protective cover from the main-valve-block to gain access

to it and its peripheral devices, as shown above.

3. Check the valve block and its connections for oil leaks and damage. Make sure

that all hydraulic connections are correctly connected and do not leak.

4:22

Inspect the high-pressure-filter's container, as shown in the above image. Make sure
there are no leaks and that all connections are correctly connected.

4:23

Make sure that the high-pressure-filter's body is clean, then remove the internal filter
and replace it with a new one.

4:24

Inspect the master-module and its connections, as shown in the above image. Make
sure all connections are routed and connected properly. If there are any signs of cor-
rosion or damage, make sure these are fully investigated and corrected.

«
...
25
26
27
28
29
...
»

Содержание EcoDrive Hook-Lift L














































Отзывы:

Нет отзывов

Похожие инструкции для EcoDrive Hook-Lift L

Бренд: Velux Страницы: 11

Бренд: Nelson Страницы: 19

Бренд: Miller Electric Страницы: 35

Бренд: M-system Страницы: 10

Бренд: M-system Страницы: 10

Бренд: M-system Страницы: 5

Бренд: Triax Страницы: 52

ThermoPro G4 Series

Бренд: Curtis Страницы: 40

Бренд: ubbink Страницы: 61

HERCULES 6.5 PLUS

Бренд: Fenix Страницы: 24

Бренд: M-system Страницы: 3

Бренд: Spartus Страницы: 28

RIRS 400HE EKO 3.0

Бренд: Salda Страницы: 34

ACCOLIFT series

Бренд: ACCO Brands Страницы: 140

Бренд: Dino lift Страницы: 121

Бренд: Kamatec Страницы: 28

Бренд: morse Страницы: 6

Бренд: morse Страницы: 6

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды