JNF IN.15.702, Руководство по установке

Страница: 38 / 44

INSTALLATION MANUAL / MI0216.1 www.jnf.pt
38/44
INSTALLATION INSTRUCTION
MOTOR DRIVER
LED STATUS SITUATION/PROBLEM REMARKS
LEDs
off
LED
BLUETOOTH
on
LED
BLUETOOTH
off
all LED’s
blink in a
sequence
GREEN LED
on
ORANGE LED
on
RED LED
on
ORANGE LED
RED LED
on
GREEN LED
ORANGE LED
on
Motor driver performing correctly.
No communication between the
I/O accessories control board and
the motor driver.
Communication established
between the I/O accessories
control board and the motor
driver.
Self-adjustment is running.
The guide is in AUTOMATIC mode.
The guide is in OPEN mode.
LED is ON only 10 seconds after
selecting the operating mode,
then the LED will turn OFF.
The guide is in CLOSED mode.
LED is ON only 10 seconds after
selecting the operating mode,
then the LED will turn OFF.
The guide is in EXIT ONLY mode.
LEDs are ON only 10 seconds after
selecting the operating mode, then
the LEDs will turn OFF.
The guide is in CYCLING mode.
LEDs are ON only 10 seconds
afterselecting the operating mode,
then the LEDs will turn OFF.
º Wait 30 seconds for pairing, otherwise
start a new pairing process between both
boards.
º Bluetooth performing correctly.
º DO NOT INTERFERE the process.
º Push & Go is enabled.
º Door can be moved manually.
º The automatic lock (if supplied) blocks the
door leaf in closed position. All activation
devices (inside & outside) are disabled.
º The door is continuously doing opening
and closing cycles (normally used for
quality control tests).
º The auto lock blocks the door leaf in closed
position. Inside activation devices are enabled,
outside disabled.
RED GREEN O RAN G E RED
Operating mode LED s
LED Bluetooth
B - BLUE
MOTOR DRIVER